The Vibrator Is A Portable Vibrator For Compacting Construction Concrete Mixture During The Construction Of Residential And Industrial Buildings, Bridges.
The Vibrator Consists Of A 2800W Drive Equipped With A Safety Shut-Off Device For Operator Safety And A 2800mm Long Flexible Shaft With A 35mm Round Diameter And 400mm Long.
The Vibration Of The Mace Is Produced Using An Eccentric Mechanism.
Vibrators Are Used To Compact Concrete Mixtures By Removing Gases And Water.
Gases Are The Product Of A Chemical Reaction Between The Components Of Concrete.
Excess Air And Water Weaken The Strength Of Concrete.
With The Help Of Vibration, A Homogeneous Mass Is Obtained, Containing The Correct Proportion Of Water, Air And Cement, Which Increases The Strength Of Concrete.
After Using A Vibrator For Concrete, The Cross-Section Will Represent A Uniform Distribution Of Crushed Stone And Sand Throughout The Volume Of The Concrete Solution, Which Will Increase The Proper Strength Of Reinforced Concrete Structures Several Times.
The Concrete Solution, When Using A Vibrator For Concrete, Should Contain Less Water Than Without Using Vibrations. Vibration Should Be Carried Out Not Very Intensively, Carefully, Because In The Case Of Excessive Vibration, Gravel Settles To The Bottom, And Thinner Fractions Of The Concrete Mixture Rise Closer To The Surface.
Сб—Чт 06:00—14:00, П'ятниця – вихідний
USD
UAH